Surface soil assessment in the Ubhur area,north of Jeddah,western Saudi Arabia,using a multichannel analysis of surface waves method

Ten boreholes drilled in Ubhur area up to the depth of bedrock indicted the shallow depth of bedrock where the average depth ranges between 10 and 15 m. The standard penetration test N-values of these boreholes were measured and averaged. Based on N-values to the depth of bedrock, Ubhur area can be classified as site class C and D. Multichannel analysis of surface waves technique has been applied along seventy six profiles using 24-channel geophone array and 4.5Hz vertical geophones with 1m geophone spacing and sledgehammer and/or weight drop as seismic energy sources. Values of shear wave velocity to 30 m are calculated and then averaged (Vs30) where it ranges between 310.08 m/s and 1139.8 m/s. Therefore, Ubhur area can be classified into site class B, C and D based on site classification of the national earthquake hazards reduction program (NEHRP) recommendations. Accordingly, the greatest part of the study area falls in site class C while class B and D covered limited areas in the western and the eastern parts respectively. Depending on the shallow depth of bedrock in the study area, the Vs30 parameter is not applicable in the study area so the average values of Vs for the soil thickness, excluding the bedrock, have been calculated and mapped for site class C and D only. So Vs30 approach is not applicable for areas with shallow depth of bedrock which gives higher classification.     

Extraction and accuracy assessment of high-resolution DEM and derived orthoimages from ALOS-PRISM data over Sahel-Doukkala (Morocco)

In Sahel-Doukkala, which is characterized by lands of a relatively low relief, global DEMs and DEMs generated from digitizing topographic maps, have been the primary source of several multidisciplinary researches. Although these products present a great value of the conducted research, the level of the given accuracy is not sufficient enough for detailed geospatial analysis. These requirements led us to generate a high-resolution DEM as an alternative of available global DEMs or/and DEMs generated from digitizing topographic maps. In this study, we present a workflow to extract high-resolution DEM at 5 m resolution and derived orthoimages from ALOS-PRISM data over Sahel-Doukkala, through photogrammetric techniques, using a variation of GCPs obtained from topographic maps at scale 1:25,000. The accuracy of the generated products is reported according to NSSDA standards. Using ten GCPs, a PRISM-DEM with 3.88 m vertical accuracy and 11.60 m horizontal accuracy, both at 95% confidence level is obtained. This DEM will serve as base dataset for further detailed geospatial analysis and mapping applications in order to identify the relationship between surface parameters and groundwater, and also to assess and understand all factors influencing the development of karst landscapes and consequently subsurface stability in the investigated area.     

Mineralogy and metasomatic evolution of the Mianeh iron skarn deposit,Norduz-Agarak border,NW Iran

The Mianeh iron skarn deposit lies in the Arasbaran region within the Qaradagh metallogenic district, NW Iran. This high-grade massive magnetite skarn originated by the interaction of Upper Cretaceous limestone with metasomatic ore-bearing fluids associated with hypabyssal Oligo-Miocene quartz diorite. Mineral chemistry of the primary clinopyroxenes demonstrates the sub-alkaline, volcanic arc setting of magmatism. Two general stages of skarnification are recognized: (1) silicate skarn (stage I) is composed essentially of grossular and low-Fe diopside formed before the main mineralization and (2) magnetite-garnet skarn (stage II) composed of strongly anisotropic coarse-grained garnets with a narrow compositional zoning radially formed by addictive infiltrating of silica and iron-rich metasomatic fluids which overprint and/or crosscut the early stage silicate skarn. Anhydrous prograde calc-silicate assemblages were replaced by a series of hydrous calc-silicates (epidote, tremolite-actinolite) and/or quartz, calcite, magnetite, hematite, and pyrite. Magnetite (±hematite) is the dominant hypogene ore mineral that initially precipitated coincident with the late prograde to the early retrograde metasomatic stages. Mineralogical studies suggest that silicate skarn formation commenced at temperatures about 560 °C, X(CO₂)_fluid ≤ 0.15, αSiO₂～?1.0, and fluid pressure 1.0 kbar. The magnetite-garnet skarn formed from H₂O-rich fluids [X(CO₂)_fluid < 0.1] at a temperature of 525 to 450 °C and maximum log ?O₂ between ?20.2 and ?23. During the late stages of prograde skarn development, the stability field of andradite shifted to low ?O₂ and ?S₂ conditions resulting in main iron ore deposition (as magnetite). The andradite replacement temperature and presence of pyrite (instead of pyrrhotite) suggest that log?S₂ remained constant at about ?6 to ?7 during cooling of the system.     

Hydrochemical characteristics and evaluation of the granite aquifer in the Alwadeen area,southwest Saudi Arabia

This study was carried out in the Alwadeen area of Khamis Mushayt district of southwestern Saudi Arabia to evaluate the hydrochemical characteristics of the shallow hard rock aquifers. These hard rock aquifers mostly comprise granites and contain significant quantities of groundwater that complement the available groundwater from the unconsolidated alluvial sediments in the nearby wadis. The field investigation indicates two main fracture sets which intersect each other and are oriented in the west-northwest and east-west directions. The granitic rocks in the area are intruded by coarse-grained and quartz-rich monzogranite and pegmatite veins. Hydrogeologically, the fracture systems are important since they facilitate the groundwater storage and assume the transmissive function during times of groundwater abstraction. Given the fact that groundwater in the fractured rock aquifers generally occurs at shallow depths, it may be exposed to contamination from surface and/or near-surface sources, and it is therefore important to evaluate its quality. To this end, a hydrochemical analysis was carried out on six groundwater samples collected from the area. The hydrochemistry revealed that the groundwater is fairly fresh, and facies analysis reveals mixed Na-Cl and Ca-Mg-Cl-SO₄ types. Overall, the results reveal that the groundwater is saturated with calcite and dolomite, but unsaturated with gypsum and halite. The degree of salinity increases in the direction of the groundwater flow due to increased rock-water interaction.     

Full-scale experimental investigations on the response of a flooded passenger vehicle under subcritical conditions

Natural Hazards - Vehicles can be easily swept away by floodwaters once the flow velocity and depth reach certain critical limits, with probabilities toward fatality reported to be nearly 50%....     

Statistical method for distance determination of a stellar group

In this paper, we developed statistical method for distance determination of a stellar group. The method depends on the assumption that, the stars scatter around a mean magnitude in a Gaussian distribution. The mean apparent magnitude of the stars is then expressed in terms of the frequency function of the apparent magnitudes, so as to correct for observational incompleteness at the faint end. The problem reduces to the solution of a highly transcendental equation for a given apparent magnitude parameter α. Computational algorithm of the method is illustrated and the numerical solutions of the basic equation are given for some values of α .